CAME C-BXT Installation Manual - Page 2

Browse online or download pdf Installation Manual for Garage Door Opener CAME C-BXT. CAME C-BXT 20 pages. Gearmotor for sectional doors

Print Page

"CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY"

"THIS MANUAL IS ONLY FOR PROFESSIONAL INSTALLERS OR QUALIFIED PERSONS"

1 Legend

This symbol indicates sections to be read with particular care.

This symbol indicates sections concernig safety

This symbol indicates notes to communicate to users.

2 Destination and use applications

2.1 Destination

The CBX series gearmotor was designed to automate chieﬂ y sectional doors with direct transmission on the shaft using springs

or with chain drive; however, the CBX can also be used for sliding and folding doors with the respective accessories.

Uses other than the ones described above and installations using methods other than those shown in this technical

manual are considered prohibited.

2.2 Use applications

For sectional doors with direct transmission:

For sectional doors with chain drive:

For sliding and folding doors:

* The speed varies depending on the diameter of the drum; in particular, models of cable winder drums used by the main sectional

door manufacturers in the speciﬁ c dimensions were inserted into the descriptions.

2.3 Fields of use

C-BX / C-BXE

Residential - Condominium - Industrial

C-BXE24

Residential - Condominium

C-BXT / C-BXET Industrial

3 Standard followed

The following standard were complied with for this product: EN 12978, UNI EN 954-1, CEI EN 60335-1, UNI EN 12453.

4 Description

4.1 Gearmotor

All gearmotors are designed and built by CAME CANCELLI AUTOMATICI S.p.A. in compliance with the prevailing safety regulations.

Guaranteed for 24 months unless tampered with.

The enclosure is made up of a part in aluminium alloy inside of which the non-reversible, electromechanical gearmotor operates,

and partly in ABS plastic that houses the terminals for the electrical wiring.

The CBX series has several versions depending on the type of use - residential, condominium or industrial - with mechanical end

stop or with an encoder system (see para. 2.3 Fields of use).

The complete line:

Gearmotor 230V A.C. with encoder and control boards

001C-BXE Gearmotor 230V A.C. with encoder

002 ZCX10 - Control board

002 ZCX10C - Control board with safety block and command buttons

Gearmotor 24V A.C. with encoder and control boards

001C-BXE Gearmotor 24V A.C. with encoder

002 ZL80 -Control board

002 ZCX80C - Control board with safety block and command buttons

002 BN1 - Board for connecting 2 emergency batteries (12V - 1.2Ah)

"IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION"

door height up to 5.5 m;

Speed* 7.15 m/1' with cable winder drum ~Ø 105 mm;

Speed* 9.3 m/1' with cable winder drum ~Ø 138 mm.

door height up to 8.5 m;

Speed* 9.15 m/1' with cable winder drum ~Ø 208 mm.

door width up to 5.5 m for C-BXE / C-BXE24 / C-BXET;

door width up to 11 m for C-BX / C-BXT.

wing weight 1000 kg max.