CAME PRATICO SYSTEM BX-P Installation Manual - Page 12

Browse online or download pdf Installation Manual for Garage Door Opener CAME PRATICO SYSTEM BX-P. CAME PRATICO SYSTEM BX-P 19 pages. Automation for sliding gates

Print Page
7 Installation procedure of the transmitter for remote control
Read the three steps below before beginning installation procedures:
- prepare the radio board (paragraph 7.1);
- procedure for codifying the transmitter (paragraph 7.2);
- memorizing the code on the command board (paragraph 7.3).
7.1 Prepare the radio board (AF1)
1) On AM transmitters operating at
433.92 MHz (TOP and TAM series),
position the jumper connection on circuit
card AF43S as shown on the sheet.
2) The AF1 board must ALWAYS be inserted
into the coupling (ref. point 5, page 8) when
the power is off because the motherboard only
recognises it when it is powered.
7.2 Procedure for codifying the transmitter
ATOMO SERIES
AT01 - AT02 - AT04
see instruction sheet
inside the pack of
AF43SR circuit card
TOP SERIES
D
12
TOP
TAM
T432M - T312M
set the code to dip-switch C and channel to D (P1=CH1 and P2=CH2, default setting)
P1
CH1
C
P2
CH1
Frequency/MHz
Radiofrequecy board
FM 26.995
FM 30.900
AM 433.92
AF43S / AF43SM
AM 433.92
AM 40.685
TOUCH SERIES
TCH 4024 - TCH 4048
see instructions on pack
TOP
CH2
CH3
CH4
CH2
CH3
CH4
Transmitter
AF130
TFM
AF150
TFM
TAM / TOP
AF43SR
ATOMO
AF40
TOUCH
Radio board (AF1)
Motherboard