CAME RODEO Manual - Page 4

Browse online or download pdf Manual for Garage Door Opener CAME RODEO. CAME RODEO 7 pages. Automation system for sliding doors with microprocessor control

Print Page
1
1'00£°
-KIM
Dip 10-way
1
ON
Parameter storage (used during calibration pag. 17).
2
ON
Checking the charge level on the emergency (whit MA7032, see pag.18).
-
3
Not used, keep the dip in position "OFF».
4
Constant push while closing
ON
5
ON
"Step-by-step" operation (see contact 2-M, pag.14).
6
ON
Interface with other automation system (see "installing the interface system" pag.20).
7/8
ON
Disabled electric lock (see pag.19).
7
ON
Continuous operation of lock (locks doors open and dosed) see pag.19
8
OFF
7
OFF
Continuous operation of lock (locks doors closed) see pag 19
8
ON
7/8
OFF
Electric lock disengaged from local control (controlled by function switch MA7041) pag.19
9/10
ON
Emergency system doses doors in case of power failure (see pag.18)
9
OFF
Emergency system opens doors in case of power failure (see pag.18)
10
ON
9/10
OFF
Normal operation powered by emergency battery in case of power failure (see pag.18)
Dip 4-way
Activation of spring-loaded anti-panic device (set dip switch 4 to ON, conslant push while dosing,
1
ON
1Q-dip function selector, see pag.19).
-
2
Not used, keep the dip in position "OFF»
Exdudes the photoelectric cell function (MF9011 or MF9111 card inserted into the control board,
3
ON
pag.22)
-
4
Not used, keep the dip in position "OFF»
FUNCTIONS OF INDICATOR LED
LED
STATUS
1
flashing
1
lit
2
(')
lit
3
4
lit
5
lit
,
lit
6
lit
7
flashing
8
flashing
8
6/7/8 lits
('J in this case, the LED signal remains lit to indicate that the anti-panic device ballenes are run down only if the
emergency ballery status check is disabled (1o-way dip 2 set
(10-way dip 2 set to ON).
,.
,

SELECTION FUNCTIONS

SIGNAL
-Encoder is inoperative
-Encoder is inoperative
-<!mergencybattery is discharged
-pilot light on 24V a.c.
-photocell contact open
-interface function aclivated (see "installing the interface-)
-malfunction on electnck lock
-pilot light on amperometnc sensor
-automatic closing cycle in progress
-"read- error during automatic calibration cycle
-automatic calibration procedure terminated
SELECTION FUNCTIONS
SELECTION FUNCTIONS
~ C0~CDCDCD~CDCD
2 3
: tlE
1
._--
_.
OFF); whereas it flashes if the battery check is activated
10
I
5 6 7 8
4
o