CAME F1000 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Door Opening System CAME F1000. CAME F1000 15 pages. External automation system with articulated arms for hinged gates
Also for CAME F1000: Standard Installation (16 pages), Manaul (16 pages), Standard Installation (12 pages)

Print Page

1. Installation

7 Maintenance

7.1 Periodic maintenance

Periodic maintenance to be carried out by the end-user is as follows: wipe clean the glass surface of the photocells; check

that the safety devices work properly; remove any obstructions.

We suggest checking the state of lubrication and tightness of the anchoring screws on the operator.

To check the efficiency of the safety devices, move an object in front of the photocells when gate is closing. If the operator inverts

the motion or stops, the photocells are working properly.

This is the only maintenance procedure to be carried out with the power source connected.

Before performing any maintenance procedures, cut off the main power, to prevent possible accidents due to gate movement.

To clean the photocells use a water dampened cloth. Do not use solvents or other chemical products which may ruin the devices.

In the event of any strange vibrations or squeaking, lubricate the joints with grease, as shown in the diagram.

Make sure there are no plants within the photocell's beam, and that the gate motion is free of any obstacles.

7.2 Trouble shooting

MALFUNCTIONS

POSSIBLE CAUSES

The gate will not

• There is no power

open nor close

• The gearmotor is released

• The transmitter's batteries are run down

• The transmitter is broken

• The stop button is either stuck or broken

• The opening/closing button or the keyswitch are stuck

The gate opens but

• The photocells are engaged

will not close

The flashing light

• The bulb is burnt

does not work

CHECK AND REMEDIES

• Check that the power is up

• Lock gearmotor (Chapt. 5.8)

• Replace batteries

• Call assistance

• Check that photocells are cle-

an and in good working order

• Call assistance