Acoustic Research Personal Sound Amplifier Quick Start Manual - Page 6
Browse online or download pdf Quick Start Manual for Speakers Acoustic Research Personal Sound Amplifier. Acoustic Research Personal Sound Amplifier 6 pages.
Print Page
3. Apply the Skin
Remove the speaker's back cover
Clean the speaker's back cover
Peel the skin from its backing
Apply the skin to the speaker's back cover
IMPORTANT: This skin was designed to be as easy to
take off as it is to put on the speaker. So, if you notice that
you didn't apply the skin exactly the way you wanted, or
if you want to replace this skin with another one in the
future, don't worry: simply pull back a corner of the skin
and peel it slowly off the speaker.
The skin is designed to go on
the speaker's back cover. It's
easier to apply the skin when the
back cover is off the speaker. To
remove this cover, lift the latch
at its bottom.
Use a soft, dry cloth to clean
any dust or particles from the
surface of the speaker's back
cover.
Gently remove the skin from its
backing.
Note: Save the backing—you
can use it to store the skin if
you ever need to take it off.
Place the slot at the bottom of
the skin directly over the latch at
the bottom of the back cover (as
shown here).
Push up on the middle of the skin
to apply it to the middle of the
back cover (as shown here).
Press out from the middle of the
skin toward the edges (as shown
here). Use the base of your palm
to press out any bubbles.