Alto ELVIS10 User Manual - Page 6
Browse online or download pdf User Manual for Speakers Alto ELVIS10. Alto ELVIS10 14 pages. Elvis series passive full-range speakers
Also for Alto ELVIS10: User Manual (7 pages), User Manual (14 pages)
Print Page
- 1. For Passive Full-Range Speakers
- 2. For Active Subwoofer & Satellite Speakers
- 3. Passive Full-Range Speaker for Elvis10/Elvis12/Elvis15/Elvis12M
- 4. Active Full-Range Speaker for Elvis10A/Elvis12/Aelvis15A/Elvis12Ma
- 5. Active Subwoofer Speaker for Elvis12Sa/Elvis15Sa
- 6. Elvis Technical Specifications
2. QUICK START - ACTIVE SPEAKER CABINET
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely
down.
-. For Active Full-range Speakers
1). Connect one side of the signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and
the other side of the cable in to the Line Input (COMBO) of your active speaker cabinet (with Stereo-Jack or XLR).
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control fo the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the
output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
Elvis Active Full-range Speakers
Signal Cable
Power Cord
Left
Main Mix
Tripod
Output
Mount
Mixer
QUICK START
Signal Cable
Right
Main Mix
Output
5
Power Cord
Tripod
Mount