Acoustic Research AWD211 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Headphone Acoustic Research AWD211. Acoustic Research AWD211 12 pages. Wireless 2.1 stereo headphones

Print Page

Charging the Headset

If you use the rechargeable batteries provided with the headphones,

you should charge them before you use the headphones for the ﬁ rst

time. The batteries charge when the headphones are placed in the

charging cradle on the transmitter as shown below.

WARNING: To avoid risk of ﬁ re or injury, DO NOT place the

headphones in the charging cradle if you installed alkaline or other

non-rechargeable batteries – this could cause the batteries to leak,

which would damage the headphones.

To charge the headphones:

1. Connect the AC adapter to the power jack on the back of the

transmitter. Then plug the AC adapter into a standard wall outlet or

surge protector.

Note: This power adapter should be plugged in so that it stays

vertical or lies ﬂ at.

2. Locate the charging contact

on the bottom of the left

headphone. Line this contact

up with the charging pins on

the transmitter.

3. Place the headphones in the

cradle on top of the transmitter.

The indicator light on top of the

transmitter ﬂ ashes green when

the headphones are charging.

Before using your headphones for the ﬁ rst time, let them charge

continuously for 16 hours.

Notes about charging:

• When the batteries are charged, remember to remove the

headphone from charging cradle of the transmitter.

• Never leave the batteries charging for more than 48 hours.

ETTING

Left headphone,

side view

Charging contact

TARTED

Transmitter,

top view

Charging pins