Diverse GENIUS-II Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Power Supply Diverse GENIUS-II. Diverse GENIUS-II 20 pages. Genius-ii power supply

Print Page

Installing The Genius-II Power Supply

Installation is to be carried out only by suitably qualified personnel.

The preferred orientation is with the cooling fins vertical and located such that

there is a minimum of 80 mm free air space above and below them. This allows

for the lowest operating temperature of the internal electronics and hence the

highest reliability of the product.

The final enclosure must also provide adequate ventilation to the outside world (or

larger internal cavity) to prevent excessive heating of the air within the enclosure.

The unit is rated to provide full power in both vertical and horizontal orientations

with enclosure air temperatures up to 50 C.

Note: The enclosure air temperature can easily exceed 50 C if adequate

ventilation is not provided.

The unit has over-temperature protection, meaning it will shut down if its internal

temperature rises above a safe level. The unit will automatically restart once it has

cooled to an acceptable level.

WARNING: Do not install unit in same compartment where flammable

material such as petrol is stored.

The Genius-II should be securely mounted to a suitably strong surface, using the

two pre-drilled mounting brackets. Dimensional details are provided in Figure 1

below.

WARNING: If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in order to avoid a

hazard.

This is pre-cabled and fitted with AS/NZ mains plug ready for connection to an

internal 240 V GPO. Ensure that the connection to the mains supply is in

accordance with the national wiring rules, and that the earth connection is

installed.