Alto DYNAMIC X-TRA Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Pressure Washer Alto DYNAMIC X-TRA. Alto DYNAMIC X-TRA 11 pages. High pressure washer

Print Page

Multiangle

adaptor (6)

Extension hose

Brushes (13, 14)

Tube cleaner

Water-sand-

blasting equipment Sand available from do-it-

Patio Cleaner

Foam sprayer (12)

Detergents

Stone & Wood

Cleaner

Plastic Cleaner

Metal Cleaner

Car Combi Cleaner For cars etc. With rinsing wax.

Alu Cleaner

Oil & Grease

Cleaner

Accessories

Adjusted in angles from 0

for better working posture

and cleaning of hard to get at

places as for instance barrels

or the underside of the lawn

mower. Fits all nozzles.

7 m extension hose increa-

sing the working range.

For cars and other sur-

faces. Available in

more shapes.

15 m long tube cleaner for the

cleaning of tubes and drains.

For removal of paint and rust.

yourself shops.

Equipment for quick

cleaning of patio/

drive/flagstones.

Equipment for the

application of foam.

Holder on the machine. Di-

stance approx. 1 m.

For flagstones, brick- and

woodwork.

Suitable for moss og algae.

For plastic and synthetic

materials such as garden

furniture.

For cleaning of metal such as

garden tools.

For surfaces of aluminium.

Applied with an atomizer.

For cleaning of grease and

oil on motors for instance.

Applied with an atomizer.

4.0 Maintenance

WARNING! Always disconnect the plug from the

socket prior to maintenance or cleaning.

To ensure a long and problem free working life,

please take the following advice:

l Wash out water hose, high pressure hose, spray

lance and accessories before mounting.

l Clean the couplings of dust and sand.

l Rinse the foam sprayer after use.

Any repair should always be made in an authorised

workshop with original spare parts.

4.1 Cleaning of nozzle

A clogging up in the nozzle causes a pump pres-

sure which is too high. This is why cleaning is re-

quired immediately.

1. Stop the machine and disconnect the nozzle.

2. Clean the nozzle with the cleaning needle (11).

IMPORTANT: The needle should only be used

when the spray lance is detached!

3. Flush the spray lance backwards with water.

4.2 Cleaning of water inlet filter

Clean the water inlet filter regularly once a month or

more frequently according to use. Care-fully loosen

the filter with a screwdriver and clean it. Check that

it is intact before re-mounting it.

4.3 Cleaning of machine vents

The machine should be kept clean so as to let cool-

ing air pass freely trhough the machine vents.

5.0 Storage

The machine should be stored in a frost-free

room!

Pump, hose and accessories should always be

emptied of water prior to storing as follows:

1. Stop the machine (rotary switch in pos. O) and

detach water hose and accessory.

2. Restart the machine and activate the trigger. Let

the machine run until no more water runs through

the spray handle.

3. Stop the machine and unplug. Wind up the cable

and place it on the hook on the back of the ma-

chine.

4. Disassemble spray handle and high pressure

hose. Press the blue button and pull the hose

simultaneously.

5. Wind up the high pressure hose. Place spray

handle, nozzles and other accessories in the

holders/store room of the machine.