DIVERSIFIED 2926KF Assembly Instructions Manual - Page 4

Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing DIVERSIFIED 2926KF. DIVERSIFIED 2926KF 7 pages. Forward vision iii

Print Page
ASSEMBLY TEMPLATE
LEFT CABINET
18.00"
STEP 1:
POSITION THE TWO CABINETS IN DESIRED LOCATION. MAKING SURE DOOR
HINGES ARE ON THE OUTSIDE. (IF YOU HAVE A "K" SERIES UNIT, PLACE UNIT
OVER UTILITY HOOKUPS). LEAVE ENOUGH ROOM IN BETWEEN CABINETS FOR
REMOVABLE PANEL. LEVEL CABINETS AND ATTACH TO FLOOR.
NOTE:
1.
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\2924K & KF, 2926K & KF, 2964K & KF,
RIGHT CABINET
REMOVABLE PANEL
STEP 2:
ATTACH REMOVABLE PANEL WITH THE SCREWS PROVIDED TO THE CLEATS
ON SIDES OF LEFT AND RIGHT CABINETS BY DRILLING PILOT HOLES THROUGH
CLEATS. POSITION REMOVABLE PANEL SO THAT BOTTOM HOLES ARE MORE
THAN 4" ABOVE FLOOR. ATTACH BACK PANEL TO BACK OF CABINETS WITH
THE SCREWS PROVIDED INTO MOUNTING CLEATS LOCATED INSIDE ON TOP
AND BOTTOM OF BOTH CABINETS.
A
CREATED DRAWING
REV.
DESCRIPTION
REVISION LEVEL
TOP MOUNTING CLEAT - TYPICAL
ATTACH BACK PANEL TO TOP AND BOTTOM
MOUNTING CLEATS FROM INSIDE OF CABINET
OF BOTH CABINETS
(BOTTOM MOUNTING CLEATS NOT SHOWN)
BACK PANEL
CLEATS
SHORT
APRON
STEP 3:
LAYOUT WORKSTATION FRAME WITH SQUARE EDGES OF APRONS ON THE
FLOOR, ROUNDED EDGES FACING UP. CONNECT THE LONG APRON AND
SHORT APRON TOGETHER BY USING THE CORNER LEG BRACKET. MAKING
SURE BRACKET IS FLUSH WITH THE SQUARE EDGES OF APRONS. REPEAT ON
OTHER BRACKET.
DWN
DWN
11/8/16
EMK
BY:
DATE:
APR
DATE
BY:
APR:
APR
DATE
BY:
APR:
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
11/8/16
EMK
-
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
DATE
NAME
ECN NO.
BE ALTERED OR CHANGED WITHOUT
PERMISSION
CORNER BRACKET
SQUARE EDGES FACING DOWN
CLOSE UP OF CORNER BRACKET ASSEMBLY
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
TITLE:
FORWARD VISION III
ASSEMBLY INSTRUCTIONS
DRAWING NUMBER:
SCALE:
FORWARD VISION III
NTS
LONG
APRON
SHEET:
REVISION:
REV A
4 OF 7