3Doodler Create+ User Manual - Page 2
Browse online or download pdf User Manual for Accessories 3Doodler Create+. 3Doodler Create+ 16 pages.
Also for 3Doodler Create+: User Manual (11 pages)
Print Page
SECTION 1: WARNINGS
Disposal of this product
At the end of your 3Doodler Create+'s life, please do
not dispose of it in your general household waste. In
order to prevent possible harm to the environment
or human health from uncontrolled waste disposal,
please dispose of your 3Doodler Create+ separately
in accordance with local laws and regulations. For
more information on the separate collection systems
for waste electrical and electronic equipment, please
contact your local municipal authority. You can also
contact the retailer from which you purchased your
3Doodler Create+, who may have a recycling service, or
be part of a specific recycling scheme that you can use.
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 1
W A R N I N G S
- The Nozzle of the 3Doodler Create+
can become hot. DO NOT touch the
Nozzle, or you may be burned!
- DO NOT allow the Nozzle near or in
contact with flammable materials.
- Inform others in the area that
the Pen is hot and should not be
touched.
Unplug and set the Control Switch
to OFF when not in use or before
storing.
Allow the Nozzle to cool completely
before storing.
The Unblocking Tool can become
hot. DO NOT touch the metal part
of the Unblocking Tool after using
it to clean your 3Doodler Create+,
or you may burn yourself!
DO NOT use the 3Doodler Create+
near bathtubs, showers, basins
or other vessels containing water.
This could result in death due to
electric shock.
The 3Doodler Create+ should only be
used with ABS or PLA, FLEXY plastic
filament approved by us. Misuse
of your 3Doodler Create+, setting
your pen to the wrong heating
temperature, and/or use of non-
approved plastics or other materials
may result in damage to your pen
or injury to you, and will void your
warranty. Injuries to the user may
include, but are not limited to, harm
sustained from inhaling substances
that are not suitable for heating; or
burns from flammable materials
used in the 3Doodler Create+.
ADULT USE ONLY.
KEEP OUT OF REACH OF CHILDREN.
1
SECT
WITH
We crea
get you
its featu
will be a
may res
3Doodle
SPEED BU
LEGEND:
• Click once
• Click once
• Double cli
LIGHT LE
Solid RED:
Heating up
(Please wai
BLUE: ABS/
GREEN: PLA
Flashing Li
Reversing P
1
2
3
4
5
6
How
The 3Doo
(Drive Ge
thin line.
will refer
cools and
in the air.
11/5/2018 11:37 AM