Alto L-6 Ownes Manual - Page 6

Browse online or download pdf Ownes Manual for Recording Equipment Alto L-6. Alto L-6 19 pages. 6-channel mixing console with digital effects

Print Page

3. QUICK START

This is the fastest way to get something out from your L-6, if you have a

keyboard and a microphone.

a. With the Main switch in OFF position, connect the supplied AC Adapter to

your L-6 first and then into the AC outlet, making sure that the available

voltage is the same with your L-6.

b. Before turning on the L-6, you shall connect it to a power amplifier and

speakers. Turning off the mixer BEFORE the power amplifier.

c. Plug the microphone into Channel 1 MIC IN.

d. Turn down AUX and LEVEL controls on the input channel.

e. Put the EQ controls on center position.

f. Turn on your L-6.

g. With LEVEL control on "0" position, sing or speak in to the microphone with

normal volume and adjust the TRIM control so that the PEAK LED only blink

occasionally.

h. If you like, you can adjust the equalization at this stage.

i. Turn up MAIN MIX LEVEL until you get a comfortable volume.

j. Connect your stereo keyboard into CH 3/4 and repeat the same sequence.

Here you are. It is your first mix with your L-6.

Once you have finished your working session you shall turn the mixer off AFTER

the power amplifier. Before disconnecting the AC Adapter always turn-off your

L-6.Do not use solvents to clean your L-6. A dry and clean cloth will be OK.