Alto MAXI-Q PC User Manual - Page 9
Browse online or download pdf User Manual for Recording Equipment Alto MAXI-Q PC. Alto MAXI-Q PC 15 pages. 30+30 band digital equalizer
5.3.1 Main Page
- Load Preset
In this column of "Preset", you can select either a factory preset (1 ~ 10) or a user preset (1. ~ 128.), then
press "Load Preset" button and the selected preset will be loaded.
Factory Presets: they can be used normally, temporarily modified, but can't be cancelled, overwritten or
permanently modified. They contain some specific settings for all the system's usable configurations. For
this reason, they are the ideal starting point for creating custom presets.
User Presets: they are stored in internal memory areas in which you own personal settings can be saved.
They can be permanently modified and saved.
- EQ Type
The channel A and B may be "linked" together as stereo pairs, so that changes are simultaneously applied
to both channels. However, if you intend to use the channel delay function for speaker "time alignment"
then you should NOT use the
- Delay
Delays the signal of input (or the sum of the inputs) before sending it to the EQ processor. In this way, all
the outputs fed by that input are delayed by the same length of time. This feature is more applicable to PA
applications, where is used to compensate for the distance between blocks of speakers in large concert halls
and stadiums. The delay unit can be set in metric unit (millimeter and meter) and time unit (microsecond and
Millisecond). You can set the delay parameter either by selecting a value or dragging the speakers simply.
- Store Preset
You can save a custom preset in any a user memory area (1. ~ 128.).
- Temperature
Used to set the value of the environmental temperature of place of installation. The system uses this value
to automatically compensate for the differences due to the different speed of sound transmission according
to the air temperature
The temperature unit includes: C = degrees Centigrade, F = degrees Fahrenheit.
"linked"
mode.
O
8
O