Clear2there C2TDVR1008 User Manual - Page 10

Browse online or download pdf User Manual for DVR Clear2there C2TDVR1008. Clear2there C2TDVR1008 18 pages. 4 channel 1000 series

Print Page
Can be either TRANSPARENT (the output is active only
when the trigger criteria is present) or LATCHED (the
output is active for a set period of time after a trigger).
If set to <LATCHED>, the alarm will sound for as much
time as defined in DURATION.
If set to <TRANSPARENT>, the DURATION item will be
disabled.
DURATION: In LATCHED mode, the time that the alarm
output remains active after it has been triggered.
HDD EVENT: Determines whether a hard drive event
triggers the alarm output.
Action settings
ALARM: Determines whether alarm inputs will trigger the
alarm output.
VIDEO LOSS: Determines whether video loss on any of
the selected channels will trigger the alarm output.
MOTION: Determines whether motion detection on any of
the selected channels will trigger the alarm output.

8.5.4 BUZZER OUT

System Setup
EVENT/SENSOR
HDD EVENT
ALARM INPUT
ALARM OUTPUT
BUZZER OUTPUT
E-MAIL NOTIFICATION
Click the BUZZER OUTPUT menu and click the each
value.
OPERATION: The internal buzzer can be enabled or
disabled.
MODE:
Can be either TRANSPARENT (the buzzer sounds only
when the trigger criteria is present) or LATCHED (the
buzzer sounds for a set period of time after the trigger).
If set to <LATCHED>, the alarm will sound for as much
time as defined in DURATION.
If set to <TRANSPARENT>, the DURATION item will be
disabled.
DURATION: In LATCHED mode, the time that the buzzer
sounds after it has been triggered.
HDD EVENT: Determines whether a hard drive event
sounds the buzzer.
Action settings
ALARM: Determines whether alarm inputs will sound the
buzzer.
VIDEO LOSS: Determines whether video loss on any of
the selected channels will sound the buzzer.
MOTION: Determines whether motion detection on any of
the selected channels will sound the buzzer.
OPERATION
MODE
HDD EVENT
DURATION
ALARM
VIDEO LOSS
MOTION
8.5.5. E-MAIL NOTIFICATION.
System Setup
EVENT/SENSOR
HDD EVENT
ALARM INPUT
ALARM OUTPUT
BUZZER OUTPUT
E-MAIL NOTIFICATION
Click the EMAIL NOTIFICATION menu and click the each
value.
Determines the behavior and actions that will send an
email to a remote user.
Behavior settings
NOTIFICATION: Email notification can be turned ON or
OFF.
HDD EVENT: Determines whether a hard drive event
sends an email.
BOOTING EVENT: Determines whether a reboot event
sends an email.
Action settings
ALARM: Determines whether alarm inputs will send an
email.
VIDEO LOSS: Determines whether video loss on any of
the selected channels will send an email.
MOTION: Determines whether motion detection on any of
the selected channels will send an email.

8.6 DISK MANAGE

System Setup
Event/Sensor
Disk Manage
Click the DISK MANAGEMENT menu.
OVERWRITE/ MANUAL OVERWRITES: When set ON,
the DVR will start overwriting the earliest recorded footage
once the hard drive becomes full. In this case, the
percentage of hard drive used shown in live display will
always be 99%. When set to OFF, the DVR will stop
recording when the disk becomes full.
FORMAT: If necessary, all footage can be erased from the
DVR using this option.
DISK INFORMATION: Checking HDD Information.
NOTIFICATION
HDD EVENT
BOOTING EVENT
ALARM
VIDEO LOSS
MOTION
FREQUENCY
Display
Camera
Sound
System