Camera Motion Research Connex Mini Quick Manual - Page 2

Browse online or download pdf Quick Manual for Transmitter Camera Motion Research Connex Mini. Camera Motion Research Connex Mini 8 pages. For assembling cmr accessories with the connex mini transmitter, mini receiver, & fusion receiver

Print Page

A. Installing the Connex Mini transmitter CMR battery support and mounting cage

Step 1. The Connex Mini transmitter cage ships assembled, and must be dis-assembled to install the transmitter. To

dis-assemble, remove the top two screws from the shipped assembled Connex Mini Cage as shown below.

The two screws to remove are located between the

battery clips that lock the small right angle bracket

Step 2. Insert the Connex Mini into the cage.

Step 3. Position the hole in the small right angle bracket over the small protruding tab on the main mounting bracket.

Replace the two screws that were removed in step 1., and tighten firmly.

Then remove the small right angle bracket.

Main

Mounting

Bracket

Accessory Quick Guide