Balt 27689 Assembly Instructions Manual - Page 8
Browse online or download pdf Assembly Instructions Manual for Battery Charger Balt 27689. Balt 27689 10 pages. Economy tablet charging cart
Print Page
9.
Attach two Locking Casters (E) in the front embedded insert holes of the Bottom Panel (P-2) using
eight Screws (A) as shown in illustration #8. Attach two Non-Locking Casters (F) in the rear
embedded insert holes of the Bottom Panel using eight Screws (A). Tighten Screws with Allen
Wrench (G). Press in the Electrical Grommet (V) in the Left Back Panel's cut-out.
P-2
10.
Turn the unit over so the Casters are on the floor. Attach the Left Door (P-5) to the hinge on the Side
assembly using six Door Hinge Screws (P) into the Door's predrilled hinge holes. Attach the Door
Latch (N) to the top of the Left Door using four Door Latch Screws (O) as shown in illustration #9.
Attach an Electrical Cord Holder (R) at the top and bottom of the Right Metal Side and through the
punched holes so one is pointed up and the other down. Secure Holders using two Cord Holder
Nuts (S) from the inside. See Detail 10A.
A
F
V
P
N
O
P-5
P
E
F
R
Detail 10A
Illustration #8
S
Illustration #9