ABC Office Ideal Cutter 5210 User Manual - Page 5

Browse online or download pdf User Manual for Paper Cutters ABC Office Ideal Cutter 5210. ABC Office Ideal Cutter 5210 8 pages. Abc office ideal cutter user's manual

Print Page

Turn to the right: back gauge moves towards the knife.

Turn to the left: back gauge moves away from the knife.

For precise setting of the measurement always move the back gauge from the back towards the

knife.

Measuring scale

Under the viewing window (#14) the measurement scale rotates in accordance with the back gauge

movement. The exact measurement is to read beneath the indicator. To avoid inaccuracies, the

scale has to be read vertically from above.

Side guide (#16)

The side guide (#16) in combination with the back gauge allow a square alignment of paper pile to

be cut.

IMPORTANT – Please note that cutting accuracy depends on precise alignment of the paper

against the side and back gauges and proper tightening of the paper clamp.

Thermal overload switch (#10)

If the motor should be subjected to excessive strain (e.g. continuous cutting of strong cardboard

with a dull knife), the power supply to the motor will be interrupted by the thermal overload

switch (#10).

The overload button will pop out a few mm. After a short cooling down period, the overload

button can be reset again.

Maintenance

Knife change

Precise cuts are only possible with a sharp knife. The knife should be changed as soon as the

quality and the accuracy of a cut are not in accordance with the standards expected from this

cutting machine. Knife life with normal paper is approximately 20 working hours; of course, this

will vary with different types of paper.

We recommend the purchase of a spare knife, so that a sharp knife is always available. This

ensures that your machines remains operative even if the original knife has to be sent away for re-

sharpening. Look for a professional re-sharpening service locally. Of course, your distributor

knows one and can help you in this regard.