Camfil PM1 Tracker Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Measuring Instruments Camfil PM1 Tracker. Camfil PM1 Tracker 8 pages. Indoor air quality (iaq) measurement device

Print Page

Instruction Manual - PM1 Tracker

5. MONITORING MODE

This function is not activated yet.

6. SETTINGS

Settings gives access to select: Units and Wireless.

6.1 UNITS

This menu allows the choice of temperature unit. Select between Celsius

and Fahrenheit.

6.2 WIRELESS

This menu allows to activate distant connection for the data processing.

This function is not activated yet.

6.3 ALWAYS ON

This menu allows to have the screen always on during different modes.

If the unit is connected to the main supply, the PM1 mode will restart after

10 minutes, with the screen always on.

ANNEX : BATTERY

If the unit is off, press the Selection Button once to check battery status:

• If the Operational Indicator LED blinks in green, the PM1 Tracker can

be used

• If the Operational Indicator LED blinks in red, you must charge the battery

Note: if no flash appears, charge the battery

On the Information Panel, an indication of the battery charge is displayed.

The PM1 Tracker will automatically shut down if the battery is empty.

In order to charge the battery, use the micro USB/USB cable provided in

the box, plug it into your computer or your phone charger.

In case of special charger use, check that the voltage is DC 5V and can

deliver more than 500mA.

If the battery fails and an alert icon appears at the top of the Information

Panel, please contact [email protected] for support.

Ver. 5.0

Camfil - Clean air solutions