Esel EL-2703 Installation Instructions Manual - Page 8

Browse online or download pdf Installation Instructions Manual for Smoke Alarm Esel EL-2703. Esel EL-2703 14 pages. Wireless supervised photoelectric smoke detector

Print Page

Mounting a Detector

♦

Select the installation location.

♦

Remove locking pin securing the

mounting bracket to the unit (see

Figure 7).

♦

Remove the mounting bracket

from the unit by rotating it

counterclockwise.

♦

Use the bracket as a template for

marking the mounting holes

♦

Using an appropriate drill, drill two

holes at the marks and insert

anchors.

♦

Using screws (supplied) attach the

bracket to the wall as in Figure 7.

♦

Line up the side slot of the bracket

and the detector. Push the

detector onto the mounting

bracket and turn it clockwise to fix

it into place.

Insert the locking pin in order to

secure the mounting bracket to

the detector (see figure 7).

♦

Pull the detector outward to make

sure it is securely attached to the

mounting bracket.

WARNING:

This detector is not suitable for installation in a

hazardous location, as defined in the national

electrical code. Do not use detector in an

outlet controlled by a wall switch.

Wireless Supervisor Photoelectric Smoke Detector

Locking Pin

Bracket

Figure 7: Smoke Detector Installation

Battery Compartment

Tamper

Figure 8: Batteries Compartment/Tamper

Detector

Screws