esera MSP 120 User Manual - Page 3
Browse online or download pdf User Manual for Accessories esera MSP 120. esera MSP 120 8 pages. Professional in-wall room sensor for temperature, air humidity and air quality (voc)
Print Page
Art. No. 11165
With the Auto-E-Connect function, ESERA devices are detected fully automatically, suitable libraries are
started and ready-formatted data is output.
The Auto-E-Connect functionality will be available for the ECO Controller and ESERA-Station 200 Pro from
2021.
Auto-E-Connect Level I
OWD Detect: Detection of new sensors and actuators and automatic start of adapted libraries.
Auto-E-Connect Level II
Visualize Product data: Readout and visualization of Auto-E-Connect and manufacturer data of sensors
and actuators, such as article number, date of manufacture, firmware and hardware version.
Auto-E-Connect Level III
Extended Plug and Play System for 1-Wire Bus
o
Pre Configuration: The OWD number for the next installation can be written to the 1-Wire device.
o
Automatic Positioning: The device logs on to each ECO controller with Auto-E-Connect III with the
new desired OWD number. This automatic login works up to the maximum possible OWD number of the
ECO controller.
o
Sensorfinder Function: The ECO controller can activate a status LED within the ESERA 1-Wire Pro
sensors. The status LED flashes or lights up permanently for a certain time. This makes the detection of
a device in a 1-Wire network much easier. A faster detection saves a lot of time and therefore money
when searching for a 1-Wire device.
o
Classes Assignment: ESERA 1-Wire devices are assigned to OWD classes with the same properties.
This assignment enables fully automatic visualization and data evaluation in control systems. A class list
is available from ESERA.
For further information about the ESERA Auto-E-Connect system please refer to the ESERA website and the
ESERA Config Tool 3.
Auto-E-Connect is registered as German and European Patent by ESERA GmbH.
4
Technical data
Function
Auto-E-Connect Feature
Temperature Sensor
Measuring range
Temperature
Accuracy Temperature
Resolution
Air Humidity Sensor
Measuring range humidity
Accuracy Humidity
Data output
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
professional Multisensor for indoor use in buildings for the
acquisition of temperature, rel. humidity and air quality (VOC).
for professional applications in commercial and private
residential sector.
the integrated VOC –Sensor requires only a very short warm-up time
after commissioning and has a fine resolution with low power
consumption.
monitoring of the operating voltage
Pre Configuration: desired OWD Storage
Automatic Positioning: OWD advanced Plug And Play
Sensorfinder Function: LED display for sensor detection
Classes Assignment: OWD class via ECO Controller
the Sensor supports Auto-E-Connect Level I and II
high-precision digital temperature sensor with 12-bit measured value
resolution
-40°C to + 85°C (sensor element: -40°C to +85°C)
0,2° in the range of 5°C to 60°C (better than DS18B20 sensor)
12 Bit, 0,06°C/Bit depending on selected resolution
capacitive digital humidity sensor with high accuracy
0-100% rel. humidity
2 % in the range of 20-80% relative humidity at 25°C
0-10V corresponds to 0-100% relative humidity, 0,1V = 1% rF
11165 V1.0 R1.1 Manual
Page 3 of 8