Divine Lighting Hyper 363P RGB User Manual - Page 17

Browse online or download pdf User Manual for Lighting Equipment Divine Lighting Hyper 363P RGB. Divine Lighting Hyper 363P RGB 18 pages. Led par lighting

Print Page

WWW.DIVINELIGHTING.COM

Problem

Cannot turn light on

DMX not functioning

Display not bright

LEDs not coming on

Several LEDs of one

color don't light

Single color LEDs

always bright/not

bright

Note：Only professional technicians can do above

13. Troubleshooting

 Check that the power plug is fully inserted

 Check that the power switch to the lights is on

 Check for blown fuse on circuit

 Check that the DMX cable is connected to the lights

 Check if the light is in DMX mode（d001)

 Check the DMX512 controller for signal output

 Check that the DMX cable is good

 When initially powered on, did the LEDs flash once? If so, the

power source is normal; if not, please check the voltage switch

or transformer

 Check if the power input to the IC board is normal

 Check if the cable connected to the display is loose

 Replace the main board

 LEDs are connected in series first then in parallel. Check to see

if any LEDs are loose

 Use a multimeter to check continuity of each LED. Replace

burned out LED

 Check whether transistor is loose or bad

 Check whether current limiting resistor is good

 Check constant current IC is normal or not (compared with the

normal IC)

 Check the switch of this color is normal or not

 Change the IC control board

Possible Cause/Solution