Camille Bauer KINAX WT 707-SSI Operating Instructions Manual - Page 9

Browse online or download pdf Operating Instructions Manual for Transmitter Camille Bauer KINAX WT 707-SSI. Camille Bauer KINAX WT 707-SSI 13 pages. Transmitter for angular position

Print Page

1. Maintenance

Operating Instructions

KINAX WT707-SSI, Transmitter for Angular Position

1. Safety instructions

1.1 Symbols

The symbols in these instructions point out risks and have

the following meaning:

Warning in case of risks.

Non-observance can result in malfunc-

tioning.

Non-observance can result in malfunctio-

ning and personal injury.

Information on proper product handling.

1.2 Intended use

The KINAX WT707-SSI transmitter is a precision instru-

•

ment. It serves the acquisition of angular position and

rotation, processing and the provision of measured values

as electric output signals for the downstream device. Use

the transmitter for this purpose only.

The device is intended for installation in industrial plants

•

and meets the requirements of EN 61010-1.

Manufacturer is not liable for any damage caused by

•

inappropriate handling, modiﬁ cation or any application

not according to the intended purpose.

1.3 Commissioning

Installation, assembly, setup and commis-

•

sioning of the device has to be carried out

exclusively by skilled workers.

Observe manufacturer's operating instruc-

•

tions.

Check all electric connections prior to

•

commissioning the plant.

If assembly, electric connection or other

•

work on the device and the plant are not

carried out properly, this may result in mal-

functioning or breakdown of the device.

Safety measures should be taken to avoid

•

any danger to persons, any damage of the

plant and any damage of the equipment

due to breakdown or malfunctioning of

the device.

Do not operate the device outside of

•

the limit values stated in the operating

instructions.

1.4 Repair work and modiﬁ cations

Repair work and modiﬁ cations shall exclusi-

vely be carried out by the manufacturer. Do

not open the housing of the device. In case of

any tampering with the device, the guaranty

claim shall lapse. We reserve the right of

changing the product to improve it.

1.5 Disposal

The disposal of devices and components

may only be realised in accordance with

good professional practice observing the

country-speciﬁ c regulations.

1.6 Transport and storage

Transport and store the devices exclusively

in their original packaging. Do not drop

devices or expose them to substantial

shocks.

2. Brief description

The KINAX WT707-SSI transmitter records the angular po-

sition of a shaft without contact and makes it available in a

binary code at the SSI interface.

3. Scope of delivery

1 Transmitter for angular position KINAX WT707-SSI

1 Operating instructions German, English, French

4. Technical data

4.1 General data

Power supply:

10 – 30 V DC

Power consumption

without load:

typ. 50 mA (at 24 V DC)

Output circuit:

SSI, RS 422

Signal coding:

Binary code

Max. resolution:

12 Bit (1 measuring step = 5'16")

Fault limit:

± 1°

Repeatability:

0.3°

Max. clock rate:

1 MHz

Zero setting signal:

Zero setting: < 0.4 V, min. 2 ms

Idle position: 3.3 V or open

Direction of rotation:

Looking at the ﬂ ange in clockwise

rotation increasing position values

result