3DUpFitters CR-10 Smart Enclosure Kit Installation Manual - Page 5

Browse online or download pdf Installation Manual for 3D Printers 3DUpFitters CR-10 Smart Enclosure Kit. 3DUpFitters CR-10 Smart Enclosure Kit 19 pages.

Print Page

WARNING

Once you've assembled the enclosure and its on your printer...

DO NOT MOVE THE ENCLOSURE

while the printer is INSIDE

If you want to move the printer and enclosure you'll need to detach the vents and cables and remove the

enclosure ﬁrst.

Among the other things you should worry about:

• Don't let children climb on top of the enclosure.

• Don't use windex or chemical cleaners. Use plain water and a microﬁber cloth.

• Don't use a lighter on the enclosure to see if it will melt.

• Don't use sandpaper on the acrylic

• Don't see how far you can bend the acrylic panels before they break.