esera automation 11319 User Manual - Page 6
Browse online or download pdf User Manual for Controller esera automation 11319. esera automation 11319 9 pages. 1-wire controller 1 ethernet w/auto-e-connect
Also for esera automation 11319: Operating Instructions (4 pages)
Print Page
11
Connection example with iButton reader
12
Software
Data interface ESERA ASCII text
protocol
You configure the Ethernet interface
with the help of the Windows ESERA
program "Config Tool 3". This
program can be found in the
download area of the ESERA online
shop
13
Configuration and
Communication with
1-Wire Controller 1
The 1-Wire Controller 1 has
extensive configuration and
formatting options that can be read
and operated with the ESERA
"Config-Tool 3".
Since the communication between
the 1-Wire controller 1 and the
Config-Tool 3 takes place via the
open ESERA ASCII text protocol, you can also use any terminal program to
(e.g. Hercules or Putty) exchange data with the 1-Wire Controller 1 via UDP / TCPIP and carry out the
configuration
For details on the communication commands, refer to the document "Programming Manual", which can be
found in the download area of the ESERA online shop and within Config-Tool 3.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
11319 V3.0 R1.0 Manual
Page 6 of 9