Eseye HERA600 Series Configuration Manual - Page 5

Browse online or download pdf Configuration Manual for Network Router Eseye HERA600 Series. Eseye HERA600 Series 11 pages.

Print Page

This command is used to stop the listener/server.



feature serial2ip set port _portno_ protcol _tcpudp_

This command is used to configure the mode you want to use to connect to the other

end i.e tcp or udp.



feature serial2ip set port _portno_ enabled true



feature serial2ip set port _portno_ enabled false

Enabled – Enabled command is used to register the uart specified by portno to receive

the uart data.

When configured for udp this command also binds the udp socket and when

configured for tcp this command will set a flag for tcp connection so that when data is

received from the uart, then tcp will send the connect to the server.

Disabled – Disable command is used to release the uart and close the tcp client and

udp sockets.



feature serial2ip show configuration

This command will the display the options configured for the ports.

feature serial2ip show status



This command will show on which ports serial2ip is running i.e. Port 1 or Port 2 or both.