ACOUSTIC SOLUTIONS 4144845 Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Speakers ACOUSTIC SOLUTIONS 4144845. ACOUSTIC SOLUTIONS 4144845 20 pages. Aluminium bluetooth speaker with fm radio

Print Page
ACOUSTIC SOLUTIONS 4144845 Instruction Manual

Using your Bluetooth Speaker

Switch on

Press and release the
button on the remote control to power on the product.
The first time that you use your product it will power on in Bluetooth mode. 'HI', followed by
'bT' will be displayed and be visible through the speaker cloth.
The red LED on the front of the product will now change to blue colour and then flash
between red and blue as the product searches for other Bluetooth devices.
Note: After first use, your product will always power on in the mode it was last used in (BT, FM
Radio or AUX).

Switch off

Press and release the
button on the remote control.
The Bluetooth speaker will go into Standby mode and the LED on the front of the Bluetooth
speaker, visible through the speaker cloth, will change to red.
To completely switch off the Bluetooth speaker, switch the power switch on the back of your
Bluetooth speaker to 'Off and switch off the mains power at the wall socket.
Note: If you do not use your Bluetooth speaker for 20 minutes and no audio signal is
received, the product will automatically go into standby mode.
Press and release the
button on the remote control to switch the product back on.

Change the mode

On the Bluetooth speaker:
Briefly press and release the
Bluetooth (BT) and FM Radio (FM) modes.
If you have a 3.5mm audio input cable/ device connected via the AUX in socket on the back
of the Bluetooth speaker, you can also select AUX mode using the
Using the remote control:
If you are using the remote control, press and release the relevant button to switch to each
mode, 'BT', 'FM' or 'AUX'.
Note: You must have a 3.5mm audio input cable/device connected via the AUX in socket on
the back of the Bluetooth speaker to be able to select this mode.
button on the top of the Bluetooth speaker, or the red 'Standby'
button on the top of the Bluetooth speaker, or the red 'Standby'
button on the top of the Bluetooth speaker, or the red 'Standby'
button on the top of the Bluetooth speaker to switch between
8
button.