ESI AA355DS Instructions Manual - Page 2
Browse online or download pdf Instructions Manual for Racks & Stands ESI AA355DS. ESI AA355DS 6 pages. Articulating keyboard arm
Print PageAA355DS ARTICULATING KEYBOARD ARM
PLEASE REVIEW these instructions before beginning the installation. Check that
all parts needed were provided with your order. Contact your supplier if any
operates to your satisfaction.
PARTS PROVIDED
Articulating Arm (1)
Template (1)
ADDITIONAL TOOLS REQUIRED
• Drill with
/
" bit
1
8
• #3 Phillips drill bit
STEP 1: Use Template to Drill Pilot Holes
• Tape the template to the underside of the work
surface. Align the "front edge" line on the
template with the front edge of the
work surface.
• Drill
/
" pilot holes through the
1
8
two marked locations on the
template.
— Drill the holes
CAUTION: Be careful not to drill
through the work surface.
2
• #2 Square Phillips bit
/
" deep
5
8
Track (1)
Front Stop (1)
12x
/
" Screws (8)
3
4
10x
/
" Screws (2)
1
2
CAUTION:
This install
requires a power drill.
This is not a hand tool
install.
Tape to Underside
of Work Surface