ESI CLIMB2 Instructions Manual - Page 6
Browse online or download pdf Instructions Manual for Racks & Stands ESI CLIMB2. ESI CLIMB2 10 pages. Dual monitor sit/stand workstation
Print Page
CLIMB2
Attach Dual VESA Mount to Writing Platform Column
• Loosen the knobs on each side of the dual VESA mount to allow the mount to fit over the writing platform
column.
• With the open slots on top, slide the dual VESA mount over the column and position at the desired height.
Tighten the knobs.
— The height of the VESA mount may be adjusted at any time by loosening the knobs.
Attach VESA Screws to Monitor
• Place the monitor face down on a flat surface.
• Use the 3mm Allen key to attach M4x12 VESA screws into
the top two holes only.
— Do not tighten the screws all they way. Leave ¼"
exposed for attachment to the VESA mount.
5
Dual VESA Mount
Open
Slots
on Top
Loosen Knobs to Install
Tighten Knobs to Secure
M4x12
VESA
Screw
¼" Exposed
Top Two
Holes Only
ASSEMBLY
Rear
View
Monitor
(Face Down)