ESI CLIMB2-SLV Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Racks & Stands ESI CLIMB2-SLV. ESI CLIMB2-SLV 10 pages. Dual monitor sit/stand workstation

Print Page

CLIMB2

Attach Writing Platform to Main Assembly Arm

• Insert the threaded bolts on the writing platform

through the holes on the mount at the end of the

main assembly arm.

• Secure the bolts using the nuts and star washers

provided, as shown. Tighten the nuts using the ½"

socket wrench.

— Be sure the flat side of the nut is against the star

washer.

Change Side of Keyboard Palm Rest, If Desired

By default, the keyboard palm rest is on the left side for a right-side mouse. If desired, it may be changed to

the right side for a left-side mouse.

• Using the 4mm Allen key, remove the screws holding the palm rest from the underside of the keyboard

platform. Remove the plug from the far right-side hole.

• Re-install the screws to attach the palm rest to the right side of the keyboard platform. Use one of the new

plugs provided to conceal the exposed left-side hole.

Right-Side Mouse

Main

Assembly

Arm

Nut and

Star Washer

½" Socket

Wrench

Left-Side Mouse

ASSEMBLY

Writing

Platform