ESI 3V-LX-C4848-30 Series Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Indoor Furnishing ESI 3V-LX-C4848-30 Series. ESI 3V-LX-C4848-30 Series 12 pages. Victory-lx 3 leg electric table base

Print Page
OPERATION
CHANGING THE HEIGHT DISPLAY UNITS
This function allows you to change the display units from
centimeters to inches or the other way around.
• Press and hold S, then press and hold the DOWN
Continue to press both buttons for about 3 seconds.
— The height information will change between centimeters
and inches.
• Release both buttons.
ADUSTING THE DIGITAL KEYPAD READOUT
This function allows you to change the readout of the digital display.
• Verify the display unit format (inches or mm), set the table to any height, measure the actual height, and
write down the number (inches or mm).
• Press and hold the S button. Then press and hold the
the digital display flashes.
• Release the buttons then press
• Press the S button agin. The 2nd number on the digital display flashes.
• Press
or
to change the 2nd number you measured.
• Press the S button again. The 3rd number on the digital display flashes.
• Press
or
to change the 3rd number you measured.
• Press the S button to complete the operation.
RESET THE CONTROL UNIT TO FACTORY SETTINGS
To reset the control unit to factory settings, re-initialize the table.
• Press and hold the UP
for more than 3 seconds.
— The legs will begin to move down at half speed of normal
operation.
• Continue to press the UP
— The legs will move down to the lowest position, then
rebound
/
" to
/
1
3
16
16
• Release the UP
and DOWN
completes the initialization procedure.
or
to change the first number you measured.
and DOWN
buttons simultaneously
and DOWN
buttons.
" (2mm to 5mm) and stop.
buttons at the same time. This
VICTORY-LX 3 LEG ELECTRIC TABLE BASE
button.
button for about 3 seconds until the first number on
If one or more motors are changed
in a system, the control unit must be
reset to factory settings.
10