ESI LIFT-SLV Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Indoor Furnishing ESI LIFT-SLV. ESI LIFT-SLV 7 pages. Desk-clamp

Print Page

LIFT

Change Side of Paddle, If Desired

By default, the paddle is attached to the right

side of the top platform. If desired, it may be

changed to the left side. Holes are pre-drilled

on the left side for your convenience.

• Use the 4mm Allen key to remove the paddle

from the right side of the top platform.

• Re-attach the paddle to the left side of the

platform.

Attach the Desk Clamp and Track to the Work Surface

The desk clamp requires 4" of clearance under the work surface for attachment. The clamp

accommodates work surface thicknesses from ¾" to 3.3" (20mm to 80mm).

Adjust Clamp, If Necessary

• The clamp as shipped can be

attached to work surfaces from

1¾" to 3.3" thick.

• For thinner work surface thicknesses, the three screws on

the clamp portion may be removed and the clamp

re-attached in one of the other three sets of holes. Each

set of holes is 1" apart.

Attach Clamp

• Position the clamp at the desired location, with the

surface.

• Use the provided 5/8" wrench to tighten the clamp

bolts.

IMPORTANT: Be sure the clamp is securely tightened.

Paddle

Remove Screws

to Adjust Clamp

Work Surface

" Wrench

ASSEMBLY

¾"

3.3"

Tighten

Securely!