ESI SW10K eXperience User Manual - Page 7

Browse online or download pdf User Manual for Speakers ESI SW10K eXperience. ESI SW10K eXperience 13 pages. Professional reference sub-woofer monitor
Also for ESI SW10K eXperience: User Manual (9 pages)

Print Page

Note: Assure that the power switch is turned off and Volume control is to

minimum before connecting cable.

3) M

UTE

This connector allows you to connect a expression pedal that you can use to mute the subwoofer

sound. This is helpful if you want to make A/B comparison of the sound with and without

subwoofer and you can quickly control it with a simple pedal.

4) P

OWER

LED: Power ON (Red)/ Protection (Red) /Operation(Green)

Volume Controller: With control the volume of the subwoofer is set to properly match the

satellite speakers. You can start with setting at 12 O'clock position of Control.

If the Subwoofer is placed on the floor against one wall in a normal room, the Subwoofer sound

pressure could be increased 3dB than placed on the freestanding floor. On the other hand, if the

Subwoofer is placed in a corner, the Subwoofer sound pressure could be increased by another

3dB comparing to placing on the floor against one wall. You can use the Level control to set the

Sound Pressure of Subwoofer under different placements to match Satellite sound pressure

properly.

5) C

ROSS OVER

With the control, "CROSSOVER", an adjustable, 2nd order (12 dB/Octave) low-pass filter

gives an upper limit between 50 and 180 Hz.

If the Subwoofer SW10K connected to Professional Audio Console with Bass management, the

Subwoofer control should be set to 180 Hz as the crossover will be handled by the Console. (Or

the filter of SW10K will add together with the filter of Console and generate wrong frequency

response at crossover area.

If the subwoofer SW10K connected to Professional Audio Console without Bass management,

the Subwoofer control should be set together with low frequency limit of Satellite Control.

ONTROL

LED & V

OLUME

ONTROLLER