ClearOne 910-3200-205 Quick Start Manual - Page 9
Browse online or download pdf Quick Start Manual for Conference System ClearOne 910-3200-205. ClearOne 910-3200-205 15 pages.
Print Page
- 1. Contact Information
- 2. Table of Contents
- 3. Components Included
- 4. Important Safety Instructions
- 5. The BMA CTH
- 6. Install the Components
- 7. Quick-Start Overview
- 8. Connect the Components
- 9. Component Connections
- 10. Test the Versa Pro CT
- 11. Compliance
- 12. Part Numbers
- 13. BMA CTH Isometric Diagrams
Huddle CTH
You can mount the Huddle CTH in the following ways:
•
On the bottom side of a table top
•
On a wall
•
Behind a display
Note: Mounting hardware such as screws and anchors are not included with
the Huddle CTH.
Required Tools
•
No. 1 Phillips screwdriver
•
T15 Torx screwdriver
•
Level (to level the Huddle CTH)
Mount the Huddle CTH on the Bottom Side of a Table Top
Select your hardware based on your specific installation needs.
1. Determine the location for the Huddle CTH.
2.
Use a pencil to mark on the table the location of four mounting holes that
align with the mounting holes on the mounting ears.
3.
Determine the proper depth and diameter for the holes.
4.
Drill four pilot holes for #6 or M3.5 screws.
5.
Align the mounting holes on the Huddle CTH mounting ears with the pilot
holes.
6.
Use four #6 or M3.5 screws to attach the Huddle CTH to the table.
QSG-0081-002v1.0 January 2021
•
Drill bits appropriate for anchors
•
Electric drill
•
Drywall saw (for cutting hole in
wall or ceiling)
Quick-Start Guide
6