ClearOne XAP TH2 Installation & Operation Manual - Page 13

Browse online or download pdf Installation & Operation Manual for Conference System ClearOne XAP TH2. ClearOne XAP TH2 20 pages. Telephone interface
Also for ClearOne XAP TH2: Datasheet (2 pages)

Print Page
Installation
~ Hardware Setup
Device ID DIP switch settings
Binary
DIP Switch 1
Address
Position
0 (default)
0 (UP)
1
0 (UP)
2
0 (UP)
3
0 (UP)
4
0 (UP)
5
0 (UP)
6
0 (UP)
7
0 (UP)
8
1 (DOWN)
9
1 ( DOWN)
10 (A)
1 (DOWN
11 (B)
1 ( DOWN)
12 (C)
1 ( DOWN)
13 (D)
1 ( DOWN)
14 (E)
1 ( DOWN)
15 (F)
1 ( DOWN)

Creating an expansion bus network

1.
Place the XAP TH2 unit in the rack. The back-panel Expansion Bus In and
Expansion Bus Out connectors are designed for setting
expansion bus network. Connections between units are
daisy-chain fashion using category five twisted-pair cable.
2.
The first XAP unit in the chain must have the Expansion Bus In
connector terminated with an Expansion Bus terminator (provided).
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
DIP Switch 2
DIP Switch 3
Position
Position
0 (UP)
0 (UP)
0 (UP)
0 (UP)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
1 ( DOWN)
1 ( DOWN)
1 ( DOWN)
0 (UP)
0 (UP)
0 (UP)
0 (UP)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
1 ( DOWN)
1 ( DOWN)
1 ( DOWN)
DIP Switch 4
Position
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 ( DOWN)
0 (UP)
1 (DOWN)
up your
made in
Figure 2.4. E-bus connection diagram
9