3form SimpleSpec 200.37-Edge Installation Manual - Page 6
Browse online or download pdf Installation Manual for Indoor Furnishing 3form SimpleSpec 200.37-Edge. 3form SimpleSpec 200.37-Edge 12 pages.
Print Page
Ready To Go
SimpleSpec 200.37-Edge
Installation
6
Cable Couplers and Tensioners Position and Installation
a
When installing models end to end (meaning the ends of the fins are lining up) 3form recommends to leave a 1/2" - 1" gap
between modules to avoid any aesthetic variation due to the fins not perfectly aligning caused by material or installation
variance.
b
Determine position for anchoring.
*If anchoring in concrete follow Steps 6c-h, if anchoring in wood follow Steps 6i-j. Then continue with Steps 6k-p.
c
Concrete Installation
Drill Ø10mm hole, minimum 65mm
deep.
For more information, please visit 3-form.com or call 800.726.0126
December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
d
remove drilling debris with a blowout
bulb or with compressed air.
tm
Installation Manual
e
With screw in anchor (3-15-311A), use a
hammer to insert anchor.
6