AIMobile NC-X1 User Manual - Page 5

Browse online or download pdf User Manual for Computer Hardware AIMobile NC-X1. AIMobile NC-X1 7 pages. Image refresh

Print Page

3. Getting Started

3.1. Hardware Requirement

1. Linux Host PC/Notebook with Ubuntu Linux X64 20.04 or 18.04
2. USB Type-A to Micro USB cable (to connect Host PC/NB to NC_X1)
3.2. Download Image & Refresh Script
1. Check the OneDrive URL provided by AIMobile for image refresh package (X1_r35_1_0.tar.xz
in the example below).
2. Download the image refresh package and extract it to Linux Host PC/NB, a
will be created, and the image burning script

3.3. Image Refresh Procedures

1. Connect Linux Host PC/NB to NC_X1 device with USB Type-A to Micro USB cable
2. Put NC_X1 to force USB recovery mode. (check Section 3.4 below)
3. Enter the extracted image refresh package folder
NX_Flash.sh
execute
4. After image is refreshed, NC_X1 will reboot automatically.
to download image to NC_X1, it takes around 15~20 minutes.
Copyright protected. All rights reserved.
NX_Flash.sh
is in it.
(./bootloader)
on Linux Host PC/NB and
bootloader
folder
Page 2 of 7