ABC PROIZVOD Concept 2 mini air Technical Instructions - Page 13
Browse online or download pdf Technical Instructions for Cookers ABC PROIZVOD Concept 2 mini air. ABC PROIZVOD Concept 2 mini air 16 pages. Central heating cookers
Print Page
Panel disassembly for cleaning soot below the oven
The place
where to put
a screwdriver
The opening, pos. 10' , F. 7 is designed for cleaning the soot below the oven. The panel is
fastened to a clip and is easily removed by a lever principle (f.e. with a screwdriver). On a suitable
place (F.7, pos. 10), on the bottom of the panel, on the left, there is an opening. Put the
screwdriver is into the opening and place it under the panel by 120 mm, press it down (lever
principle) and the panel will be detached from the clip. Remove the panel gently from the small
column on the right. Remove protective sheet metal and gasket from the opening intended for
cleaning the soot below the oven. When cleaning is complete, replace the gasket, protective
sheet metal and panel.
The cooker cooling by means of watering the firebox is forbidden.
Once the heating season is over, clean the cooker thoroughly and completely. Drain the water
only if some utility repairs are required.
Upon the completion of the heating season, the manufacturer recommends a linen bag with 1-2
kg of grinded quicklime to be suspended within fuel feeding area.
9. DISASSEMBLY AND DISPOSAL
At the end of the product's life, remove power supply, water supply and heating connections,
drain water and handle the product to an authorized waste collection/recycling point.
In compliance with the European Directives, the symbol of "crossed recycle bin" (see the Figure
on the right) warns you that you are committed to treat unusable products with a special attention.
Picture number 7
Plating
Carrier
Screwdriver for removal of plating
12
Detail A