ACOUSTIC SOLUTIONS SP 121 Manual - Page 5

Browse online or download pdf Manual for CD Player ACOUSTIC SOLUTIONS SP 121. ACOUSTIC SOLUTIONS SP 121 10 pages.

Print Page

INSTALLATION AND POSITION

This CD player should be positioned on a flat stable surface. We would

recommend that the position of your hi-fi equipment should be chosen carefully

to provide adequate protection for this device, and also provide an attractive

showcase for your investment. Hi-fi equipment is not designed to be moved

often, therefore it is recommended that a permanent home for your hi-fi be

achieved as soon as possible.

This CD player contains sensitive electronic circuitry, it is not recommended

that audio equipment such as CD players, turntables or cassette decks be

placed immediately next to heavy electrical equipment which may interfere

with them. Do not place this product in areas of direct sunlight, nor place it

adjacent to a radiator or other heating appliances.

Like all electrical devices this tuner will generate a modest amount of heat.

The cooling of this device is reliant upon the flow of air through the case.

Care should be taken not to cover this unit with items such as rugs, covers or

curtains which will restrict this air flow, and may cause over heating.

Never allow the CD player to come into contact with water or liquids, and

ensure that small objects do not fall through the ventilation grilles. In the event

of this happening, disconnect the wall plug from the mains supply immediately,

and contact your local dealer for service advice.

Do not position the power cable where it can be walked upon, or damaged by

regular traffic. Ensure that all other interconnection cables are stowed safely

behind the unit, and cannot be easily snagged or kicked, thus causing damage

to the unit.

Ensure that all interconnection cables have been made correctly, and that

correct polarity has been maintained.

It is necessary to connect this CD player to an external amplifier and

loudspeaker set up, (it is not possible to connect loudspeakers directly to this

CD player). Connect a pair of phono cables (supplied) from the signal output

sockets on the rear of the SP 121 to the audio input sockets on the back of

your amplifier.

Please see the following diagram which details the required connections: