3form SimpleSpec Desk Partition U 200.70 Installation Manual - Page 5
Browse online or download pdf Installation Manual for Indoor Furnishing 3form SimpleSpec Desk Partition U 200.70. 3form SimpleSpec Desk Partition U 200.70 5 pages.
Print Page
Ready To Go
SimpleSpec 200.70-Desk Partition U
Product Description and Specifications
Features and Benefits
• Easy to install black hardware
• Overall dimensions: 57.75" back � 18" returns � 24" high
• Minimum screen size of 12" wide � 4" high per segment
• Custom sizing up to a 96" overall length and max 24" high,
available through your Sales rep
Design Options
• available in 1/4" (6.35mm) Design Material or Clear Material
• Contains 40% recycled content and a Declare Label
Available Finishes/Textures
3form Design Option Screens come standard with both a
front and back Sandstone surface finish (clear). Sandstone is
a durable surface finish that has a subtle grainy texture with a
slightly frosted look. additional Material Finishes include Hem,
Mesh and Spider. White fabric versions are shown below. See
www.3-form.com/Elements for all [Hem/Mesh] color options.
Clear
Hem
Mesh
Usage Limitations
Do not use cyanoacrylate or solvent type thread locking
materials with screens.
Flammability and Smoke Test Results
- Building Code Approvals
Screens have been independently tested and meet 2018
International Building Code criteria.
Test
Design Options
aSTM D 2843 Smoke
71.6%F
Density
aSTM D 635
Self Extinguishing
aSTM D 1929 Self-ignition
716%F
uL94
Flame Class - HB
uPITT Mortality Test
Pass
aSTM E84-03
Flame Spread, 1/4" thick
65
Smoke Generated
425
nFPa 286 1/4" thickness
Pass
Cleaning Instructions
3form screens should be cleaned periodically. a regular,
seasonal cleaning program will dramatically help prevent
noticeable weathering and dirt build-up. 3form recommends
the use of the following common cleaning products: Windex,
Formula 409, Simple Green, Fantastik, Virex, 10:1 Water/Bleach
Solution.
rinse screens with lukewarm water. remove dust and dirt from
screens with a soft cloth or sponge and a solution of mild soap
and/or liquid detergent in water. a 50:50 solution of isopropyl
alcohol and water also works well. rinse thoroughly with
lukewarm water.
Do:
• Always use a soft, damp cloth to blot dry. (Rubbing with
a dry cloth can scratch the material and create a static
charge)
Do not:
• Use scrapers or squeegees on screens
• Use scouring compounds, gasoline, benzene, acetone,
carbon tetrachloride, certain deicing fluids, lacquer thinner
or other strong solvents
• Use highly alkaline or abrasive cleaning agents
• Rub with a dry cloth
For more information, please visit 3-form.com or call 800.726.0126
January 2021 | Man-rTG-200-70 | rEV 001 © 2021 3form, Inc. all rights reserved.
• Optional Wire Management Detail
• Ships flat (returns are line bent on-site)
Acoustic Options
• available in 3/8" (9.53mm) Sola Felt
• nrC rating of 0.35 (alpha W .25H)
Available Finishes
Screens can be specified in 15 Sola Felt options.
admiral
Citrine
Spider
Ebony
nickel
Flammability and Smoke Test Results
Result
- Building Code Approvals
Pass < 75%F
Screens have been independently tested and meet 2018
International Building Code criteria.
Pass CC1
Pass > 650%F
aSTM E84-03
Pass
Flame Spread, 1/4" thick
Smoke Generated
not more toxic
than wood
Sound Absorption Test Results
Test-ASTM C423-09
Class B: 26-75
≤450
noise reduction Coefficient
Pass
alpha-W
Cleaning Instructions
To remove airborne debris and dust, 3form
recommends to periodically vacuum Felt Screens. The
slight shedding of fibers from the Felt is normal and not
indicative of any defect.
To treat liquid stains, remove spills immediately using
a clean damp cotton cloth or with detergent soap and
warm water. Carpet and fabric cleaners can usually
be used; always test an inconspicuous area before the
actual stain.
Do:
• Vacuum or use a soft brush to clean Felt Screens
Do not:
• Use strong solvents, highly alkaline or abrasive
cleaning agents
• Do not completely saturate module with cleaning
solution or water
aries
armor
Cast
Driftwood
Dune
Dusk
Emerald
Jasper
Mineral
nightfall
Zinc
Test
Felt
Result
10
Class a: 0-25
55
�450
Result
0.35
0.25
Installation Manual
tm
Flatness Tolerance
Screens shall not have distortion in the form of a wrinkle,
twist or scallop along the perimeter of the sheet. Overall
warp extending across the sheet is permitted to a maximum
of 9/32" (7.14 mm) for each 48" (1.2 m) or fraction thereof.
Screen is to be measured when laying horizontally under its
own weight on a flat continuous surface.
Clear Gloss Option
• available in 1/4" (6.35mm) PETG Gloss
• Provides high impact resistance with glass-like
translucency
Available Textures
3form Desk Partition PETG Gloss is a clear material with a
high gloss finish on both the front and back surface that
provides clarity and unobstructed views.
Usage Limitations
Do not use cyanoacrylate or solvent type thread locking
materials with Desk Partition PETG Gloss.
Flammability and Smoke Test Results
- Building Code Approvals
Screens have been independently tested and meet 2018
International Building Code criteria.
Test
PETG Gloss
aSTM D 2843
71.6%F
Smoke Density
Self
aSTM D 635
Extinguishing
aSTM D 1929
716%F
Self-ignition
uL94
Flame Class - HB
uPITT Mortality Test
Pass
aSTM E84-03
Flame Spread, 1/4" thick
65
Smoke Generated
425
nFPa 286 1/4" thickness
Pass
Cleaning Instructions
3form Desk Partition PETG should be cleaned periodically.
a regular, seasonal cleaning program will dramatically help
prevent noticeable weathering and dirt build-up. 3form
recommends the use of the following common cleaning
products: Windex, Formula 409, Simple Green, Fantastik,
Virex, 10:1 Water/Bleach Solution.
rinse screens with lukewarm water. remove dust and dirt
from Desk Partition PETG with a soft cloth or sponge and
a solution of mild soap and/or liquid detergent in water. a
50:50 solution of isopropyl alcohol and water also works well.
rinse thoroughly with lukewarm water.
Do:
• Always use a soft, damp cloth to blot dry. (Rubbing with
a dry cloth can scratch the material and create a static
charge)
Do not:
• Use scrapers or squeegees on Desk Partition PETG
• Use scouring compounds, gasoline, benzene, acetone,
carbon tetrachloride, certain deicing fluids, lacquer
thinner or other strong solvents
• Use highly alkaline or abrasive cleaning agents
• Rub with a dry cloth
Result
Pass < 75%F
Pass CC1
Pass > 650%F
Pass
not more toxic
than wood
Class B: 26-75
≤450
Pass
5