Alton EVOLUTION EVSTA2508M Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Greenhouse Kit Alton EVOLUTION EVSTA2508M. Alton EVOLUTION EVSTA2508M 18 pages. Aluminium staging and shelving

Shelving Installation

Start by making a pencil mark on each glazing bar. You can set the height of your shelf to what ever
suites your needs, but the optimum position is 300mm down from the top edge of the eaves bar.
This will give you enough room on top of your low level staging and enough height for smaller
plants on the shelving. Another benefit is if you have an A-frame it is easier to fit the shelving around
this.
Once all the small brackets are fitted you can attach the first staging arm (diagram 1). Fit a diagonal
support to the arm on the first slotted hole, then attach one of the small brackets to the diagonal
support (diagram 2). Now fit the arm to the small bracket on the side of the greenhouse with an M6
bolt. Using a small spirit level adjust the position of the bracket at the end of the diagonal support
until the shelf arm is level, then fix with a 25mm screw (there is no need to pilot hole for a screw of
this size).
300mm
Dia. 1
HE0300M
Dia. 2
Diagram 1
Diagram 2
3