3form SimpleSpec 200.87-Divide Installation Manual - Page 6

Browse online or download pdf Installation Manual for Office Equipment 3form SimpleSpec 200.87-Divide. 3form SimpleSpec 200.87-Divide 12 pages.

Print Page
Ready To Go
SimpleSpec 200.87-Divide
Installation
Required Tools
Drill
1
Drill Pilot Holes (�12)
a
base plate templates (3-15-2160) will be provided. The
base plate template has hole locations for drilling. Spacers
will also be provided, unique to this configuration; cut to
size based off post dimensions in the quoting phase.
b
Following the Installation Template, drill pilot holes. use
appropriate pilot hole diameter and depth for the type of
substrate you are fastening to.
*3form stocks the drill bits required for the concrete
and wood pilot holes. If you wish to purchase a drill bit,
please contact your 3form sales representative.
Drill Bits
Hammer Drill
Installation Template
Spacer Guide
3-15-2347
For more information, please visit 3-form.com/Elements or call 800.726.0126
FEbruary 2021 | MaN-rTG-200-87 | rEV 001 © 2021 3form, Inc. all rights reserved.
tm
Installation Manual
Rubber Mallet
Installation Template
Base Plate Guide
3-15-2160
Substrate
Ø
Drill Bit
Concrete
8mm
3-15-2350
Wood
3/16"
3-15-2335
Saw
Depth
Anchors
min 4.3"
3-15-2309
min 3.5"
3-15-2310
6