ClearSounds Liberty 30T User Manual - Page 3

Browse online or download pdf User Manual for Telephone ClearSounds Liberty 30T. ClearSounds Liberty 30T 8 pages. Clearsounds communications liberty phone users guide 30t

Print Page

The following items are included in your 30T Liberty Phone:

• Handset

• Base (Note: The handset and base are hard-wired together)

• Line cord (Hard wired into base)

• (2) Screws for Wall Mounting

1. Set the volume and ringer controls to the desired levels.

2. Plug the long line cord into the modular baseboard or wall jack. Make sure

the plug snaps securely into place.

NOTE: There is no limit to the number of sockets you

can have installed in your home.

However, there is a limit to the number of telephones you can operate on your

exchange line. Installing too many telephones would overload the line, which

would inhibit the telephones from ringing. To avoid overloading your exchange

line there is a method of calculating the number of telephones you can use. Add all

of the Ringer Equivalence Numbers (abbreviated REN) together, which are marked

on the base of each telephone. Numbers differ so do check. The numbers added

together must total 5 or less.

The REN value of your ClearSounds 30T, is1.0.

1. The switch located above the handset microphone allows the ringer to be

switched On or Off.

2. If you don't like the ringer melody, you can choose a new one by changing

the settings as follows.

Low

Tone 1

Tone 2

Tone 3

The default setting is 6.

3. To set the ringer tone, lift the handset and press the PROG button. Then

press the # button and the number 1-8 on the keypad. (See the chart above.)

WARNING: when the ringer has been set to the off setting (digit 0), an incoming

call will be indicated by the handset strobe light flashing. The ringer will be

automatically returned to the previous setting (1 to 9) when the handset is

lifted from the base unit.

Features & Functions

Connecting the Phone

Med

Components

Ringer

High

Ringer switch