1 BY ONE MD950 Operation Manual - Page 10

Browse online or download pdf Operation Manual for Turntable 1 BY ONE MD950. 1 BY ONE MD950 17 pages. Nostalgic wooden turntable

Print Page
LISTENING TO PHONE ( Turn Table )
Gently Open The Dust Cover.
1.
Lift the COVER all the way up until it stop, the cover will now stay open.
2.
Use screw driver clockwise to unlock the screw lock ( for first time use) .
3.
Remove tie-wrap from under the TONE ARM. ( for first time use)
4.
Remove white protective needle cover by gently pulling
towards the front of the unit.
5.
Release tone arm HOLD DOWN CLIP by gently pushing
to the right. This will unlock TONE ARM from its arm rest.
NOTE: Re-lock the HOLD DOWN CLIP when moving the unit
to another location.
Turntable Operation
1.
Connect power and press the
2.
Press the FUNCTION button to select PHONE mode. "PHONE and PHO"
indicator show on display.
3.
Set the SPEED selector to the correct position (33, 45 or 78rpm).
4.
Place the record on the turntable.
5.
Lift the
TONE ARM CONTROL
desired starting point over the record.
6.
Lower the
TONE ARM CONTROL
play start.
7.
Turn the VOLUME CONTROL dial knob to adjust the volume to the
desired level.
8.
Slide the AUTO STOP CONTROL switch to choose the auto stop
function.
9.
At the end of the record, the TONE ARM will stop automatically. You must
return the TONE ARM to TONE ARM REST manually.
NOTE: Sound output of the built-in amplifier is limited, when playing records,
to avoid feedback and rumble. This is normal, so keep the volume as low as
possible on the unit, and rather increase volume on external amplifier.
ADAPTOR for 45 RPM (Accessory)
This adaptor allows you to play 45 RPM records.
1.
Gently place your 45 RPM record onto the turntable.
2.
Place the 45 RPM ADAPTOR over the spindle.
3.
Follow the steps under turntable operation to play you record.
button to turn on unit.
lever and move the TONE ARM to the
lever, the TONE ARM moves down and
9