ClearSounds SW200 Operating Manual - Page 10

Browse online or download pdf Operating Manual for Alarm Clock ClearSounds SW200. ClearSounds SW200 20 pages. Shake up wake up alarm clock
Also for ClearSounds SW200: Features (1 pages)

Print Page

LED/optional Lamp Flashing

Press and hold the LED Flash

key to activate the LED

flasher function. If you have plugged a lamp into the clock, it

will also flash when the alarm goes off.

Vibrating Pad Jacks

You can connect a vibrating pad to each of the vibrating pad

jacks on the back of the clock. Jack A is used for Alarm 1 and

Jack B is used for Alarm 2. Each shaker operates independently.

Simply plugging the shaker in to the jack and activating

the shaker function will allow the shaker to vibrate during the

scheduled alarm time.

Press and hold the Shaker

key to activate the

shaker function.

SOUND ALARM

Adjustable Volume Control

The Volume control increases or decreases the loudness of the

alarm, which can go as high as 87 dB. The volume control

is adjustable for all 3 sound alarm patterns (see pg. 11 for

more information about sound alarm patterns). To adjust the

volume, roll the slide wheel up to make it louder and down to

make it softer.

Adjustable Tone Control

The Tone control shapes the sound by changing the frequencies

of the alarm. The tone control only works for sound alarm

Pattern 1 (see page 11 for more information about sound

alarm patterns).

10 – ENGLISH