AIMS AIMS Power PWRI150012S User Manual - Page 3

Browse online or download pdf User Manual for Inverter AIMS AIMS Power PWRI150012S. AIMS AIMS Power PWRI150012S 6 pages. Dc to ac pure sine wave power inverter

Print Page

2) Rear panel:

3) Remote control box (not included)

Remote control interface

4. ASSEMBLE

1. Location

First ensure that there is enough space to install the inverter, while the installation

location must meet the following requirements:

(1) Dryness: Avoid dripping water or other liquids on the inverter.

(2) Coolness: The operating temperature for the product is 32-104°F, the preferable

temperature is 50-77°F, the lower temperature is better within this range.

(3) Ventilation: There should be a certain distance between inverter and other objects,

to avoid blocking the product's vents. Allow 2 inches from openings.

(4) Cleanness: Do not install the product around dusty, wood chips or other particles.

When the cooling fan turns on, the particles will be sucked into the inverter , thus

increasing internal temperature..

(5) When connecting inverters and batteries, it will produce arcs or sparks, so there

should not be flammable objects around, such as gasoline, alcohol, etc.

2. Mounting instructions

Mount on a solid platform because of the heavy weight, such as floor, table or

stable support. In order to avoid sliding off, the platform should bear the weight of the

product, and it is better to fix the product with four screws.

3. Mounting the remote control box (Optional equipment)

1) the remote is designed to be mounted on a dash or other surface where a hole should

be cut so that it sits flush. This is not a requirement however just a recommendation.

2) The remote cable should be plugged into inverter and the remote before mounted.

Note: Optional remote is not needed for inverter operation. The main power switch will

work the power on / off.