Dixon Automatic Tool SKC-PTA-BE60 Operation And Maintenance Manual - Page 13

Browse online or download pdf Operation And Maintenance Manual for Power Screwdriver Dixon Automatic Tool SKC-PTA-BE60. Dixon Automatic Tool SKC-PTA-BE60 17 pages. Automatic industrial cordless brushless power torque screwdrivers

Print Page

Screw fastening process

4.Set up functions

Settings

Auto learning

mode

Connection to

wireless

controller

Up+Down

->SL->SC->At->RC->SP->HC->LC->Ht->LT-->END

(Complete process)

Step1: Step1: Press P+S simultaneously for 5 sec., screen

will be flashing and greed LED will be on.

Step2: Start to set up functions step by step until shows HC,

use actual workpiece and screw to set up HC. (max.

fastening no. of thread)

Step3: When setting completes, press S to save settings.

Settings will be saved after screen flash 2 times.

Set up this function to connect to wireless controller

(KL-WSCBSN)

1. Default set as not connected. Press Up+Down

simultaneously for 10 sec. to change connection status.

2. To disconnect, press Up+Down simultaneously for 10 sec.

to disconnect

Functions

Description

Remark

1. If no workpiece and

screw were not used

during HC setting. It

will auto save as 99.9

2. After HC settings

complete, HT and LT

will also be shown.