Dixon Bayco 5200-SFI-3 Maintenance & Operating Instructions - Page 3

Browse online or download pdf Maintenance & Operating Instructions for Cables and connectors Dixon Bayco 5200-SFI-3. Dixon Bayco 5200-SFI-3 3 pages. Sight glass kit

Print Page

5200-SFI and 5200-SFI-3 Sight Glass Kit

Assembly

1. Insert the new O-rings in to the grooves.

2. Apply O-ring lubricant on the outside face of the sight glass to

reduce friction. Position the new sight glass as shown in figure 2,

making sure that the edge with the chamfer will pass the O-rings first

then press the sight glass evenly into the bore. If necessary use the

old sight glass to push down the new sight glass.

3. Insert retaining ring into the groove in the body.

4. Verify the new seals and sight glass do not leak by capping one

end and applying low air pressure (3 to 5 PSI) and checking for air

bubbles under water.

Figure 2 – Sight Glass Assembly

Dixon Bayco Warranty

For complete warranty information, please refer to the latest

Dixon catalog.

5200-SFI and 5200-SFI-3

877.582.3569