ClearSpan R030B00000F Manual - Page 2

Browse online or download pdf Manual for Shelters ClearSpan R030B00000F. ClearSpan R030B00000F 5 pages. 30' wide rafter kit with mounting feet

Print Page
Short Rafter Section
Joggled End of the
Long Rafter Section
Rafter Section
(CFG030PC18GS03)
Rafter Leg
(CFG072ANCS003)
Strut
(108865)
Mounting Foot
(108500)
2
Rafter Assembly Instructions
ATTENTION: The pre-punched purlin mounting holes in
the short rafter sections are not centered. Before assembly,
measure from the holes to the end of the rafter section and
position the longer 40" section toward and connect it to the
chevron, which will be at the top of the assembled rafter.
Repeat this procedure for all rafter assemblies to ensure that
the purlin mounting holes remain aligned throughout the length
of the frame. If the purlin holes do not align during the frame
assembly, verify that all rafters are assembled as shown on this
page and throughout this manual.
Consult the diagrams below and all rafter diagrams throughout
this manual before you assemble the rafter.
Pre-Punched Purlin
Mounting Holes
Purlin
Rafter Section
(CFG030PC18GS02)
ATTENTION: During the rafter assembly, verify that you
have positioned the long end of the short rafter section—
approximately 40" from the end of the section to the purlin
mounting holes—toward the peak of the assembly.
See the Over-the-Top diagram at the end of this manual
and Page 6 for additional details.
40"
Purlin
Rafter Section
(CFG030PC18GS02)
Ground Level
Short Rafter Section
Assembled Rafter
Rafter Section
(CFG030PC18GS03)
(CFG072ANCS003)
Strut
(108865)
Mounting Foot
Revision date: 11.02.10
Rafter Leg
(108500)