DIYElectronics PRUSA I3 Build Manual - Page 18

Browse online or download pdf Build Manual for 3D Printers DIYElectronics PRUSA I3. DIYElectronics PRUSA I3 19 pages.

Print Page

[9]

Spool Holder & LCD Cable Clips

Materials needed:

Printed spool

holder

M4 nuts

M4 washers

• Insert nuts into spool holder

• Line up and attach spool

holder to inside of enclosure

using M4 screws and nuts

* Note there are holes on both sides of the

closure should you want to print a second

spool holder

[9.2]

LCD Cable Clips

• Attach clips to the inside of the

roof using double sided tape

* Place one clip towards the front left side and

the other towards the back, as shown in the

picture

• Feed LCD display cables

through the clips on the roof

M4 x12 screws

Printed cable

clips