DIYtrade SF-LM17 User Manual - Page 2
Browse online or download pdf User Manual for DJ Equipment DIYtrade SF-LM17. DIYtrade SF-LM17 8 pages. Moving head light 90w-120w led
Congratulations on purchasing this 120W LED moving head
Thank you for extending your trust in our technology!
For reasons of safety and approval(CE) the personal reconstruction and/or modification of this
product is prohibited.Please observe that damage caused by modifications performed manually to
this device is not covered by the warranty.
This product leaves our works in a perfect condition.Please observe all notes in these operating
instructions to warrant this condition and the safe operation of hte product!
Any damage caused as a result of the non-compliance with these operating instructions leads to
the expiration of any warranty claim.The manufacturer does not accept liability for any damage to
property or for personal injury resulting from the improper handling of the product,or
non-observance of the operating instructions.
Store these operating instructions in a safe place for later reference and pass them to any new
holder when selling or lending or leaving this device in the hands of any other party.
Application According to Purpose
This product is a lighting effect which creates specila light effects with one lamp.Togenerate these
effects,the product must be connected to mains and a DMX-512 compatible controller.
This product is designed for AC100~230V/50~60Hz operation and exclusively for indoor use.
If used for any purpose other than described in these operating instructions,the device may suffer
damage and the warranty expires.Also,any other use is linked with risks such as short
circuits,fire,electrical shock,etc.
The manufacturer's serial number must never be removed as otherwise the warranty expires.
Notes on safety
1. Before Operation
Prior to the initial operation of this produc,please do the followings
-Read these operating instructions with great care;
-Study and observe all instructions carefully;
-Ensure that everybody and anybody involved in the installation,operation,transport and storage
of this product is suitably qualified;
-Verify whether any visible damage was caused during transport.lf thepower cord.housing or the
light are damaged,do not operate the device;contact your specialized dealer immediately.
2. Supply Voltage,Mains Cord and Connection to Mains
The handling of supply voltage,mains cords and connections to mains calls for particular care
considering the riskfrom a life-threatening electric shock,the risk of fire and the risk of short circuitsl
please observe the following notes in particular:
Products operating on supply voltage should be kept out of the reach of children.Therefore ensure
the permanent supervision if children are in the immediate vicinity of the product!
For commercial facilities the regulations on the prevention of accidents of the respective trade
association must be observed.The operation of this equipment at schools,training facilities,and
hobbyorself-help workshops must be supervised responsibly by trained personnel.
Check the product regularly for any damage to the malns cord! Should you discover any damage
to the malns cord, do not operate or disconnect this product! Secure the product against accidental
operation and contact your specialized dealert.
Always separate the product from mains by holding the mains plug by the handling surface .Never
disconnect by holding the line cord ! Be sure to connect the product exclusively to
ATTENTION:
DANGER OF LIFE! RISKOF FIRE!
RISK OF SHORT CIRCUIT!
ATTENTION:
DANGER OF LIFE! RISKOF FIRE!
RISK OF SHORT CIRCUIT!
2/8